Arduino Based Radar System Using Ultrasonic Sensor
Overview
In this Arduino Tutorial, we will show how to make ultrasonic sonar radar using the Arduino Board and the Processing. Radar is a long-range object detection system that based on radio waves technology. Radar system technology is used in aircraft, missiles, marine, weather predictions, and automobiles. Here we will use ultrasonic sonar to detect the object in short range, although the tutorial name says Arduino radar system.
You can watch the following video below:-
Components Required
The required components list for this tutorial given below:-
- Arduino Uno
- HC-SR04 Ultrasonic Sonar
- Servo Motor
- Breadboard
- Some Jumper Wire
Pin Configuration
The pinout of the HC-SR04 ultrasonic sonar has been given following below:-
 |
| Fig: Ultrasonic Sensor Pinout |
The pinout of the servo motor has been given following below:-
 |
| Fig: Servo Motor Pinout |
Circuit Schematic
The circuit diagram of Arduino interfacing with ultrasonic sonar sensor and servo motor.
 |
| Fig: Radar System Arduino |
Circuit Description
First, we made a Veroboard stand for connecting the Ultrasonic sensor to the Servo motor like it’s shown in the picture below.
Next, we will connect the Arduino pin with the ultrasonic sensor.
Arduino Ultrasonic sensor
5V Vcc
Gnd Gnd
Pin 3 Trig Pin
Pin 4 Echo Pin
Arduino Servo Motor
5V Vcc
Gnd Gnd
Pin 5 Signal
Source Code
#include <Servo.h>.
const int Trig_Pin = 3;
const int Echo_Pin = 4;
long Duration;
int Distance;
Servo myServo;
void setup() {
pinMode(Trig_Pin, OUTPUT);
pinMode(Echo_Pin, INPUT);
Serial.begin(9600);
myServo.attach(5);
}
void loop() {
// rotates the servo motor from 0 to 180 degrees
for(int i=0;i<=180;i++){
myServo.write(i);
delay(16);
Distance = calculateDistance();
Serial.print(i);
Serial.print(",");
Serial.print(Distance);
Serial.print(".");
}
// Repeats the previous lines from 180 to 0 degrees
for(int i=180;i>0;i--){
myServo.write(i);
delay(16);
Distance = calculateDistance();
Serial.print(i);
Serial.print(",");
Serial.print(Distance);
Serial.print(".");
}
}
int calculateDistance(){
digitalWrite(Trig_Pin, LOW);
delayMicroseconds(2);
digitalWrite(Trig_Pin, HIGH);
delayMicroseconds(10);
digitalWrite(Trig_Pin, LOW);
Duration = pulseIn(Echo_Pin, HIGH);
Distance= Duration*0.034/2;
return Distance;
}
Here’s the complete Processing Source Code of the Arduino Radar:-
import processing.serial.*; // imports library for serial communication
import java.awt.event.KeyEvent; // imports library for reading the data from the serial port
import java.io.IOException;
Serial myPort; // defines Object Serial
// defubes variables
String angle="";
String distance="";
String data="";
String noObject;
float pixsDistance;
int iAngle, iDistance;
int index1=0;
int index2=0;
PFont orcFont;
void setup() {
size (1200, 700); // ***CHANGE THIS TO YOUR SCREEN RESOLUTION***
smooth();
myPort = new Serial(this,"COM5", 9600); // starts the serial communication
myPort.bufferUntil('.'); // reads the data from the serial port up to the character '.'. So actually it reads this: angle,distance.
}
void draw() {
fill(98,245,31);
// simulating motion blur and slow fade of the moving line
noStroke();
fill(0,4);
rect(0, 0, width, height-height*0.065);
fill(98,245,31); // green color
// calls the functions for drawing the radar
drawRadar();
drawLine();
drawObject();
drawText();
}
void serialEvent (Serial myPort) { // starts reading data from the Serial Port
// reads the data from the Serial Port up to the character '.' and puts it into the String variable "data".
data = myPort.readStringUntil('.');
data = data.substring(0,data.length()-1);
index1 = data.indexOf(","); // find the character ',' and puts it into the variable "index1"
angle= data.substring(0, index1); // read the data from position "0" to position of the variable index1 or thats the value of the angle the Arduino Board sent into the Serial Port
distance= data.substring(index1+1, data.length()); // read the data from position "index1" to the end of the data pr thats the value of the distance
// converts the String variables into Integer
iAngle = int(angle);
iDistance = int(distance);
}
void drawRadar() {
pushMatrix();
translate(width/2,height-height*0.074); // moves the starting coordinats to new location
noFill();
strokeWeight(2);
stroke(98,245,31);
// draws the arc lines
arc(0,0,(width-width*0.0625),(width-width*0.0625),PI,TWO_PI);
arc(0,0,(width-width*0.27),(width-width*0.27),PI,TWO_PI);
arc(0,0,(width-width*0.479),(width-width*0.479),PI,TWO_PI);
arc(0,0,(width-width*0.687),(width-width*0.687),PI,TWO_PI);
// draws the angle lines
line(-width/2,0,width/2,0);
line(0,0,(-width/2)*cos(radians(30)),(-width/2)*sin(radians(30)));
line(0,0,(-width/2)*cos(radians(60)),(-width/2)*sin(radians(60)));
line(0,0,(-width/2)*cos(radians(90)),(-width/2)*sin(radians(90)));
line(0,0,(-width/2)*cos(radians(120)),(-width/2)*sin(radians(120)));
line(0,0,(-width/2)*cos(radians(150)),(-width/2)*sin(radians(150)));
line((-width/2)*cos(radians(30)),0,width/2,0);
popMatrix();
}
void drawObject() {
pushMatrix();
translate(width/2,height-height*0.074); // moves the starting coordinats to new location
strokeWeight(9);
stroke(255,10,10); // red color
pixsDistance = iDistance*((height-height*0.1666)*0.025); // covers the distance from the sensor from cm to pixels
// limiting the range to 40 cms
if(iDistance<40){
// draws the object according to the angle and the distance
line(pixsDistance*cos(radians(iAngle)),-pixsDistance*sin(radians(iAngle)),(width-width*0.505)*cos(radians(iAngle)),-(width-width*0.505)*sin(radians(iAngle)));
}
popMatrix();
}
void drawLine() {
pushMatrix();
strokeWeight(9);
stroke(30,250,60);
translate(width/2,height-height*0.074); // moves the starting coordinats to new location
line(0,0,(height-height*0.12)*cos(radians(iAngle)),-(height-height*0.12)*sin(radians(iAngle))); // draws the line according to the angle
popMatrix();
}
void drawText() { // draws the texts on the screen
pushMatrix();
if(iDistance>40) {
noObject = "Out of Range";
}
else {
noObject = "In Range";
}
fill(0,0,0);
noStroke();
rect(0, height-height*0.0648, width, height);
fill(98,245,31);
textSize(25);
text("10cm",width-width*0.3854,height-height*0.0833);
text("20cm",width-width*0.281,height-height*0.0833);
text("30cm",width-width*0.177,height-height*0.0833);
text("40cm",width-width*0.0729,height-height*0.0833);
textSize(30);
text("BRC_Bravo", width-width*0.875, height-height*0.0277);
text("Angle: " + iAngle +" °", width-width*0.48, height-height*0.0277);
text("Distance:", width-width*0.26, height-height*0.0277);
if(iDistance<40) {
text(" " + iDistance +" cm", width-width*0.225, height-height*0.0277);
}
textSize(20);
fill(98,245,60);
translate((width-width*0.4994)+width/2*cos(radians(30)),(height-height*0.0907)-width/2*sin(radians(30)));
rotate(-radians(-60));
text("30°",0,0);
resetMatrix();
translate((width-width*0.503)+width/2*cos(radians(60)),(height-height*0.0888)-width/2*sin(radians(60)));
rotate(-radians(-30));
text("60°",0,0);
resetMatrix();
translate((width-width*0.507)+width/2*cos(radians(90)),(height-height*0.0833)-width/2*sin(radians(90)));
rotate(radians(0));
text("90°",0,0);
resetMatrix();
translate(width-width*0.513+width/2*cos(radians(120)),(height-height*0.07129)-width/2*sin(radians(120)));
rotate(radians(-30));
text("120°",0,0);
resetMatrix();
translate((width-width*0.5104)+width/2*cos(radians(150)),(height-height*0.0574)-width/2*sin(radians(150)));
rotate(radians(-60));
text("150°",0,0);
popMatrix();
}
No comments